=== Important Note: There are two versions of this driver software package available ===

• The Core version contains IntuitiveWorkFlowTools_v1.1.1.0, which has a reduced set of productivity tools
• The Diagnostic version contains IntuitiveWorkFlowTools_v2.0.1.0, which contains the full suite of productivity tools

Please Note: The Diagnostic version of the Intuitive Workflow Tools contains four tools classified as accessories to a medical device. Although these have been cleared for use by FDA and CE, they may not be available in all regions. Please visit www.barco.com/mxrt for more information and regional availability.

=== Important notes to consider before upgrading ===

You can determine the version of Intuitive WorkFlow tools you have installed by checking the About page of the Barco System Settings control panel.

Driver 10.171.2.0 does not support Windows 10 OS prior to v1607. When attempting to install the software package on such OS, the installer will not install the display driver for MXRT-2600, MXRT-5600 or MXRT-7600, because these display controllers require driver 10.171.2.0
If you are using MXRT-1150, MXRT-2150, MXRT-5200 or MXRT-7300 in conjunction with any of these display controllers (Barco MXRT-1450, MXRT-1451, MXRT-2400, MXRT-5400, MXRT-5450, MXRT-7400, MXRT-2500, MXRT-4500, MXRT-5500, MXRT-5550, MXRT-7500, MXRT-2600, MXRT-5600, MXRT-7600), then you should use driver 10.143.Barco.3.2

If you are using MXRT-1150, MXRT-2150, MXRT-5200 or MXRT-7300, and don’t have any of these display controllers in your system (Barco MXRT-1450, MXRT-1451, MXRT-2400, MXRT-5400, MXRT-5450, MXRT-7400, MXRT-2500, MXRT-4500, MXRT-5500, MXRT-5550, MXRT-7500, MXRT-2600, MXRT-5600, MXRT-7600), then you should use driver 8.743.Barco.8.0, which you can download from the link below: ftp://latestdriver:!Bdr1ver@ftp.barcomedical.com\Windows 7 WDDM\Legacy\K5408131-05.00_8.743.Barco.8.0.zip

We recommend installing the MXRT driver prior to plugging in the touchpad. Alternatively, cancel the Wacom driver software installation process before any drivers are installed.