Wired RoomDock is a feature of the CX-50 Gen2 where the user can share high resolution and frame rate content and connect to the room audio and video over a wired connection.
Connection setup overview
- One or two screens
- No ClickShare specific drivers or app’s need to be installed
To start using Wired RoomDock, connect the USB Type-C™ port from your laptop to the front USB Type-C™ input port of the Base Unit, as shown in the image below.
If your laptop USB Type-C™ port does NOT support display port alternate mode, you can also use the USB Type-C™ port on the Barco HDMI™-in to Type-C converter kit (R9861581), for details see KB 7199.
Tip!
For information about the cable type used with Wired RoomDock, see KB 6726.
Before Wired RoomDock can be used, it must be configured in the ClickShare Configurator (Display & Audio > Input). For details, please check the installation manual.
