The Barco ClickShare Conference solution allows you to join any type of video conference in your meeting room using UC&C software (e.g. Webex, Microsoft Teams, Zoom or other UC&C tools) on your own laptop or PC. We call this concept Bring Your Own Meeting (BYOM). It allows you to connect the room speakerphone, microphone and camera wireless to your device and use the better equipment of the room in your video conferencing call.
In most video conferencing tools, the selection of the room peripherals (camera and speakerphone) will happen automatically. ClickShare Conference, however, reminds you to validate these settings in your video conferencing tool. Here is how you can review and change those settings as well as share the meeting room screen remotely.
General
To ensure an optimal conferencing experience ensure the following peripherals are selected in your video conferencing tool:
-
Select the ClickShare Room Camera to use the camera connected to the ClickShare Conference device.
-
Select the ClickShare Room Speakerphone to use the speaker and microphone connected to the ClickShare Conference device and ensure low latency audio conferencing.
Using the ClickShare speaker is not recommended for audio or video conferencing but is advised for use during general content sharing.
For an overview of the list supported peripherals with your ClickShare Conference, see the supported peripherals overview page on the Barco website.
Helpful articles
Here are the links to KB articles on integrating and using ClickShare Conference devices with UC&C tools such as Webex, Microsoft Teams and Zoom:
Webex by Cisco
-
Changing the peripheral settings in Webex (how-to, see KB2125)
-
Sharing the meeting room display remotely using Webex (how-to, see KB2295)
Microsoft Teams
-
Changing the peripheral settings in Microsoft Teams (how-to, see KB2121)
-
Sharing the meeting room display remotely using Microsoft Teams (how-to, see KB2322)
Zoom
-
Changing the peripheral settings in Zoom (how-to, see KB2124)
-
Sharing the meeting room display remotely using Zoom (how-to, see KB2291)
Contact Barco Support: If you have any questions about using your UC&C tools with your ClickShare Conference device or encounter any issues while using them with your ClickShare Conference device, please contact Barco Support by raising a service ticket (how-to, see KB6024).
