About managing inputs
The following chapters will explain how to create, edit or remove input configurations.
7.8.6 Managing inputs
User assisted workflow
Input connectors that receive a signal will automatically create a single input in the software. This single input will adopt the configuration of the incoming signal. If the signal does not transmit a configuration or if a wrong signal is connected to the connector, then the input signal can be corrupted or look differently than expected. To prevent these issues, a connector can be configured to only accept a predefined signal.
Grouped inputs
Connectors of the same type that need to share the same configuration can be grouped. This reduces the amount of repetitive work that must be done to change the configuration of a large number of connectors.