Location and unit selection
- Navigation side bar:
- Central work window: or
Click on the top area of the desired unit in the central work window.
Image 7–42 - Right panel:
7.8.4.5 Temperature
About temperature
The temperature category reads out the temperature and fan sensors of the selected unit.
Temperature diagnostics
A general thermal indicator (
) is shown after the category name. This indicator can have the following states:
- Green: all temperature diagnostics are or (no problem found).
- Red: one temperature diagnostic is (thermal issue on one or more components).
If there is a red icon take one of the following actions depending on where the problem is detected:
- For any Event Master card, replace the affected card. For more information, see “Removing an Event Master card”.
- For the motherboard (), contact Barco customer service support for further assistance. For more information, see https://www.barco.com/en/support.
- For both Event Master card and motherboard (), contact Barco customer service support for further assistance. For more information, see https://www.barco.com/en/support.
