About Event Master card removal
Unused slots will have a metal blank plate installed. The removal procedure is the same as for an Event Master card.
4.2 Removing an Event Master card
Prerequisites
Warning: The Encore3 must be disconnected from power to avoid damaging the equipment.
Required tools
Phillips screwdriver PH2
How to remove
Loosen the two thumb screws (reference 1) of the desired Event Master card. Use a PH2 Philips screwdriver.
Image 4–1 Remove the Event Master card from the slot as illustrated.
Image 4–2 - Install an Event Master card or blank plate in the slot. For more information, see “Installing an Event Master card”.