About Wi-Fi connection

By default a Wi-Fi network will be setup by the Base Unit from the moment it has booted up. It is possible to connect to this network to configure or use ClickShare.

How to connect

1. Ensure the Base Unit is powered on, for more info see “Connecting the power”

2. Connect the wireless device to the SSID and enter the password.

   The default SSID is “ClickShare-[serial number]” and the default password is “clickshare”

3. Navigate to the IP address of the Base Unit with a browser of choice.

   

   Note: The default IP address is“192.168.2.1”.
   

   Note: Depending on the configuration of the browser, a security warning could be displayed. To prevent this warning in the future, see “HTTP encryption”.
4. To initialize the configurator see “The ClickShare configuration wizard”