Prerequisites

Make sure of the following:

• Make sure the projector is installed perpendicular to the screen.
• Make sure the projector is powered on.
• Make sure the front cover is not installed. For more info, see “Removal of the front cover”.

Required tools

Torx screwdriver T10

Adjusting the distance meter

1. Close the shutter.
2. Activate the distance meter by pressing the push button.

3. Check if the laser beam of the distance meter projects perpendicular to the screen, similar to the light source.

   • If yes, no further actions are needed.
   • If no, manipulate the three adjustment screws of the laser range finder (reference 1, Image 9–10) clockwise or counterclockwise in order to adjust the laser source. Use a T10 Torx screwdriver to adjust the adjustment screws.