The general guidelines for dual projection are the following:
- Master Unit needs a "Dual Projection" License
- Sync BNC cable between both ICMP's needs to have a resistance of 50ohm.
- Same content needs to be installed on both units.
- In "Communicator - Multi Projector Settings" you need to configure both players for "Master" and "Slave". Please note that the "played frames field is configured for left, right or for both.
Important: when playing content in 2D mode you may not forget to add a "special cue" in the show editor of the (Web) Commander.
In practice it means the "Force 3D" cue needs to be added to the show; this will enable both frames also in 2D mode.
