Main power requirements
- Mono phase power net with a separate earth ground.
- Maximum power input: 100-240 VAC 50/60Hz 1100W.
- The Encore3 or the rack it is mounted in must be grounded.
- One of the following types of power cords must be used.
4.1 Installation requirements
AC Power cord with NEMA 5/15 plug up to 13 A
The wires of the power cord are colored in accordance with the following code:
|  |
Power cord with GB 2099 plug up to 10 A
The wires of the power cord are colored in accordance with the following code:
|  |
AC Power cord (mains lead) with CEE 7 plug up to 10 A
The wires of the power cord are colored in accordance with the following code:
|  |
Environment conditions
Table below summarizes the physical environment in which the Encore3 may be safely operated or stored.
| Environment | Operating | Non-Operating |
| Ambient Temperature | 0°C (32°F) to 40°C (104°F) | -10°C (14°F) to 60°C (140°F) |
| Humidity | 5% to 85% RH Non-condensed | 0% to 95% RH Non-Condensed |
| Altitude | -60 (-197Ft) to 3000m (9843Ft) | -60 m (-197Ft) to 10000m (32810Ft) |
| Air cleanliness | Clean office environment[5] | N/A |
| Air clearance | Air outlets: minimum 60mm (2.36in) Air inlets: minimum 60mm (2.36in) | N/A |
Rack requirements
The Encore3 weighs 31-33 kg (68-72 lbs) when fully populated with Event Master cards and is 4 rack units tall. Distribute the devices in the rack evenly to avoid hazardous situations.
Ensure at least 1,27cm (1/2 inch) of clearance between Encore3 and other devices in the rack.
[5] Equivalent with cleanroom standard ISO 14644-1 ISO Class 9.