About powering an Encore3

The Encore3 has two redundant power supplies. Both power supplies can divide the power needs of the Encore3 equally. When one power supply fails, the other will provide the full power to keep the Encore3 running. For this reason, it is strongly advised to always connect both power supplies.

Each power supply has two indicator lights to signal its status:

• AC input: (reference 1)

  • Green: working as intended and receiving power.
  • Amber: a power supply error has occurred.
  • Off: No power is being received.

• DC output: (reference 2)

  • Green: working as intended and powering the Encore3.
  • Amber: a power supply error has occurred.
  • Off: No power is being supplied to the Encore3.

How to power

1. Plug a power cable in the socket (reference 3) of each power supply.

   

   Tip: Only one connection is required.

   

2. Plug each connected power cable into a wall socket.

   The Encore3 will start up. This can take several minutes.