2.4.7 Tri-combo output card

DisplayPort
Digital display interface developed by the Video Electronics Standards Association (VESA). This interface is primarily used to connect a video source to a display device such as a computer monitor, though it can also be used to transmit audio, USB, and other forms of data.
HDMI
High-Definition Multimedia Interface (HDMI) is a compact audio / video interface for transferring uncompressed video data and compressed / uncompressed digital audio data from an HDMI-compliant device, the source device, to a compatible computer monitor, video projector, digital television, or digital audio device. HDMI is a digital replacement for existing analog video standards.
SDI
Serial Digital Interface (SDI) is a serial link standardized by the Society of Motion Picture and Television Engineers (SMPTE). SDI transmits uncompressed digital video over a 75-ohm coaxial cable, typically within studios, and is seen as the most professional video infrastructure equipment.
BNC
Bayonet Neill-Concelman (BNC) is a method of connecting coaxial cables to a BNC connector using a twist lock design. This twist lock ensures that the cable and the connector are in optimal contact and are hard to dislodge by accident. It enables the transmission of serial digital video, timing signals or audio signals.
Overview

The Tri-combo (gen 2) output card allows for the processing of up to four independent signals. When a valid signal is being transmitted, then the nearest indicator light will turn green.

A mix of different signals can be used to make up the four possible connections:

Image 2–12
1
DisplayPort1.2 connector with indicator LED
2
HDMI2.0 connector with indicator LED
3
SDI1 BNC connector with indicator LED
4
SDI2 BNC connector with indicator LED
5
SDI3 BNC connector with indicator LED
6
SDI4 BNC connector with indicator LED