7.12.1 Configuring a tally

Location

Navigation side bar: Tally

About tally

Up to 64 tally lights can be automatically managed through Event Master Toolset. These tally lights must be connected to a single network connected hub.

How to configure

  1. Select the desired command protocol from the drop down after Tally IP Protocol.

    Tip: Selecting OFF will disable the tally protocol.
    Image 7–180

  2. Enter the IP address of the tally hub in the input field after Tally IP Address.

    Image 7–181

  3. Enter the desired port number after Port.

    Image 7–182
  4. Click the save icon () in the header.