About linked resources

When two Encore3s are linked, inputs can be sent from one unit to the other. These inputs are sent over the link cables and occupy a send resource on the original unit and a receive resource on the receiving unit. Each created link will persist even if the source is no longer being sent. It is possible to manually release this link by editing the link resources. This is considered an advanced action and requires understanding of how the links are being used.

For example, An input on the host Encore3 is part of a scene on a destination of the client Encore3. Event Master Toolset will reserve a transmitter resource (TX) of the host and the corresponding receiver resource (RX) from the client. After a transition, this input is removed from the scene on a destination of the client. The link resource will become unused. However, the TX and RX on both the host and client remain occupied by that input. Ensuring the scene can be recalled at any moment.

Each link uses one link resource on both Encore3s.