7.3 Event Master Toolset installation

Note: The Encore3 requires Event Master Toolset 10 or higher. Any lower version will not be able to detect the Encore3.
About the installation

The following instructions use a Windows 10 installation as example. The installer flow is the same for every supported operating system.

How to install

  1. Download the Event Master Toolset package for the desired OS from the Barco website: https://www.barco.com/en/support.

    • Windows
    • Mac
  2. Start the installer.

  3. Read the displayed notice. Click Next to continue.

    Image 7–2

  4. Read and accept the Barco license. Click Next to continue.

    Image 7–3

  5. If desired, edit the default install location and program group on the following windows. Click Next to continue.

    Image 7–4

    The Event Master Toolset software will be installed with the desired settings.

  6. Click Finish to complete the installation.

    Tip: It is strongly advised to read the Readme file.
    Image 7–5