Encore3 - Restore - User guide (HTML)

Select the Computer tab from the table.
Image 6–20
Navigate to the ShowFile by clicking the Browse button.
Image 6–21
The chosen file name will be shown on the right side.
Click on Restore.
Image 6–22
A confirmation pop-up is shown.
Click on Restore & Reboot to recall all settings from the ShowFile.
Note: All the current settings will be overwritten. This action cannot be undone.
Tip: If only certain settings must be restored, then see “ShowFile editor”.
Image 6–23
The reboot may take several minutes.

Select the USB tab from the table.
Image 6–24
Select the desired ShowFile version from the list.
Image 6–25
Click on Import to load the ShowFile.
Image 6–26
The selected ShowFile will be displayed on the right panel.
Click on Restore.
Image 6–27
A confirmation pop-up is shown.
Click on Restore & Reboot to recall the settings from the ShowFile.
Note: All the current settings will be overwritten. This action cannot be undone.
Tip: If only certain settings must be restored, then see “ShowFile editor”.
Image 6–28
The reboot may take several minutes.