Location

1. Navigation side bar: Configuration
2. Central work window: Detail View or System View
3. Right panel: Adjust unit

About reset

There are four types of resets available:

• Soft, reboots the unit.
• Factory, returns all settings to their factory default value.
• Factory and Keep, returns settings to their factory default value. The selected settings will remain unchanged.
• ShutDown, puts the unit in standby mode. The power usage of the unit will decrease to 13.5W and the power button LED will turn solid red.

How to reset

1. Is there more than one unit in the system?

   • If no, go to next step.
   • If yes, click on the top area of the desired unit in the central work window and go to next step.

   

   The top area of the unit will turn blue and the unit information will be changed to the selected unit.

2. Select the desired reset method from the drop down after Reset in the right panel.

   

3. Is Factory and Keep selected?

   • If yes, check all settings that must be kept. and go to next step.
   • If no, go to next step.

4. Click Apply to confirm.

   

   Tip: If any modification to the IP address was made, then remote access to the unit will be lost after the reset.