Network Device Enrollment Service is a setup for a separate server that runs SCEP to manage digital network certificates for network equipment. Many implementations of SCEP use NDES. To use NDES, ClickShare requires the SCEP server address, the username and password ClickShare must use to log into the NDES server and a name for ClickShare to identify itself on the SCEP server. This information is obtained from the local IT department.
SCEP
Simple Certificate Enrollment Protocol is a protocol that simplifies the requesting and issuing of digital network certificates for network equipment. Mainly used in bigger organisations where a large number of network equipment must be managed. To use SCEP, ClickShare requires the SCEP server address, the SCEP challenge and a name for ClickShare to identify itself on the SCEP server. This information is obtained from the local IT department.
SNMP
Simple Network Management Protocol (SNMP) is an internet standard protocol for collecting and organizing information about managed devices on IP networks and for modifying that information to change device behaviour. In general an SNMP management suite (running on a server) communicates with an SNMP agent (running on the device). The SNMP agent collects and exposes device information in the form of variables according a MIB (Management Information Base). SNMP management suites will be able to approach ClickShare devices via SNMP protocol for requesting device information.
