About removing the front cover panel

The original cover plate is attached to the front cover by locking tabs on the rear side.

The replacement cover is attached to the front by using adhesive layer strips.

Required tools

No tools required.

Required parts

UDX cover panel

Replacing the cover plate

1. Carefully push the old cover plate out of the front cover.

   

2. Remove the adhesive from the new adapted cover plate and carefully mount it on the front cover as illustrated.

   

   Note: Ensure that the cover properly glued to the front cover.

   

3. Once the cover plate is properly installed, remove the protective foil on the front side.