9.4 Installing the distance meter assembly

How to fixate

  1. Mount the distance meter assembly as illustrated. Use a T10 Torx screwdriver.

    Image 9–6

  2. Connect the USB cable on the front side of the projector labeled “2” (reference 1, Image 9–6) with the USB connector on the camera (reference 1, Image 9–7).

    Image 9–7 Overview of the rear side of the distance meter assembly
  3. Connect the USB cable on the front side of the projector labeled “3” (reference 2, Image 9–6) with the USB connector on the distance meter (reference 2, Image 9–7).