4.2.9 Connecting over LAN

About LAN connection

Connecting the CX-50 Gen2 to the LAN, allows for the configuration and management of the Base Unit remotely.

How to connect

  1. Connect an “ethernet” cable from the LAN to the “ethernet” port at the back of the Base Unit. (reference 1)

    Image 4–13 Location of the LAN connector
    1
    Connection for the LAN cable
  2. Find the IP address that was assigned to the Base Unit by the network.

  3. Navigate to the IP address with a browser of choice.

    Note: Depending on the configuration of the browser, a security warning could be displayed. To prevent this warning in the future, see “HTTP encryption”.
  4. To initialize the configurator see “The ClickShare configuration wizard”