About the power LED

To prevent distractions, the power LED is off by default when the display is switched on and used in normal operation. This behavior can be changed so that the power LED will light up during normal operation. Below is an overview of the different power LED states, in ascending order of power consumption:

• Off: Display not powered, or display operational but power LED function disabled in OSD (see “Power LED”)
• Steady white: Display operational
• Slow blinking amber: Display in suspend mode (requires DPMS mode to be enabled in the OSD menu, see “DPMS mode”)
• Fast blinking amber: Display in standby mode (requires DPMS mode to be enabled in the OSD menu, see “DPMS mode”)
• Steady amber: Display switched off via the standby key, or display in hibernate mode (requires DPMS mode and Hibernate to be enabled in the OSD menu, see “DPMS mode” and “Hibernate”)

To enable/disable the power LED

1. Bring up the OSD main menu.
2. Navigate to the Configuration > User Interface > Indicator Lights menu.
3. Enter the Power Status submenu.
4. Select Enabled/Disabled as desired and confirm.