4.21 Grayscale conversion modes

Note: Your Nio Color 5MP display automatically detects the connected video input signals and applies the correct grayscale conversion settings. Manually selecting a grayscale conversion mode is possible, but then your display’s image source selection mode should be set to allow this. Please refer to “Image source selection” to do this.

About grayscale conversion modes

Grayscale conversion modes specify how color generated on the display controller is converted to grayscale in your display.

The available grayscale conversion modes are:

No conversion
Use red channel: This mode is intended for grayscale displays where gray is sent over the red channel.
Use green channel: This mode is intended for grayscale displays where gray is sent over the green channel.
Use blue channel: This mode is intended for grayscale displays where gray is sent over the blue channel.

To manually select a grayscale conversion mode:

Bring up the OSD main menu.
Navigate to the Configuration > Image Sources > Input Settings > DisplayPort 1/2, DVI 1/2 menu.
Enter the Grayscale Conversion submenu.
Select one of the available color conversion modes and confirm.