4.10 Luminance target

About the luminance target

The luminance target of your Nio Color 5MP is adjustable over a predefined range. When you change the luminance target, the display will adjust its backlight to reach the target.

To set the luminance target:
  1. Bring up the OSD main menu.
  2. Navigate to the Configuration > Calibration menu.
  3. Enter the Luminance Target submenu.
  4. Set a luminance target value as desired and confirm.
Note: The default, factory calibrated luminance value is available in the technical specifications table. The guaranteed backlight lifetime is valid for this setting.