About Dry mode

Dry mode prevents condensation from forming in the display.

• In DPMS mode, the backlight remains powered at a minimum level to maintain some heat in the panel.
• When returning from DPMS mode, standby mode or off state, the display fans spin fast for 1 hour to increase airflow in and around the display. After 1 hour, the fan speed returns to normal regime.

Note: Dry mode remains enabled until manually disabled.

To enable/disable Dry mode on your display:

1. Bring up the OSD main menu.
2. Navigate to the Configuration > Power Management menu.
3. Enter the Dry Mode submenu.
4. Select Enabled/Disabled as desired and confirm.