About I-Luminate

I-Luminate is a patended^[3] technology that increases image brightness. When I-Luminate mode is turned on, the LED backlight of the display is smoothly boosted to the maximum value, creating the highest possible luminance while adjusting the DICOM GSDF curve accordingly.

To switch I-Luminate on/off

• Press the Left / I-Luminate key during normal operation (while the OSD menu is not active) to switch on I-Luminate mode.
• Press the Left / I-Luminate key again to switch off I-Luminate mode and return to normal mode.

Note: I-Luminate mode will automatically switch off after 1 minute.