Approved Lenses
Note: This list only takes into account active lenses at the moment of release of this manual. Lenses that have become end-of life or end-of service are not taken into account. Consult the Barco website for the most up-to-date information on active lenses.
Consult the lens selection list to see which non-active lenses are also supported.
Tip: Use the online tool to determine the possible lenses for your configuration. See “Lens selection”.
| Part number | Name (screening) | Resolution | Throw range |
| R9802232 | FLD+ lens (0.28 : 1) Ultra Short Throw EN68 | WQXGA 0.90” | 0.30 : 1 |
| WUXGA 0.96" | 0.28 : 1 | ||
| R9801832 | FLDX lens (0.38 : 1) UST 90° | WQXGA 0.90” | 0.41 : 1 |
| WUXGA 0.96" | 0.38 : 1 | ||
| R9802244 | FLDX lens (0.65 : 1) EN67 | WQXGA 0.90” | 0.65 : 1 |
| WUXGA 0.96" | 0.61 : 1 | ||
| R9802010 | FLDX lens (0.8 : 1) EN62 | WQXGA 0.90” | 0.80 : 1 |
| WUXGA 0.96" | 0.75 : 1 | ||
| R9802243 | FLDX lens (0.8 - 1.21 : 1) EN66 Short Focus | WQXGA 0.90” | 0.80 – 1.21 : 1 |
| WUXGA 0.96" | 0.75 – 1.13 : 1 | ||
| R9801220 | FLD+ lens (0.80 - 1.21 : 1) Long Focus EN45 | WQXGA 0.90” | 0.80 – 1.21 : 1 |
| WUXGA 0.96" | 0.75 – 1.13 : 1 | ||
| R9802003 | FLDX lens (0.95 - 1.3 : 1) EN76 | WQXGA 0.90” | 0.95 – 1.3 : 1 |
| WUXGA 0.96" | 0.89 – 1.21 : 1 | ||
| R9802242 | FLDX lens (1.20 - 1.70 : 1) EN63 | WQXGA 0.90” | 1.20 – 1.70 : 1 |
| WUXGA 0.96" | 1.12 – 1.58 : 1 | ||
| R9802241 | FLDX lens (1.7 - 2.5 : 1) EN61 | WQXGA 0.90” | 1.70 – 2.50 : 1 |
| WUXGA 0.96" | 1.58 – 2.33 : 1 | ||
| R9802473 | FLDX Lens 2.5 - 4.6 : 1 (EN64) Long Throw Zoom | WQXGA 0.90” | 2.50 – 4.60 : 1 |
| WUXGA 0.96" | 2.33 – 4.30 : 1 |
This projector may become Risk Group 3 (RG3) when an interchangeable lens with throw ratio greater than 4.7 is installed.
Refer to the Hazard distance graph for the throw ratio versus hazard distance before operation. See “HD in function of modifying optics”.
